Expert Kitchen Plumbing in Blue Springs, MO & Overland Park, KS

Kitchen faucet installation costs vary based on several factors:

Factors Affecting Cost:

• Faucet Type: Single-handle faucets are simpler to install than complex pull-down or touchless models with additional components
• Mounting Configuration: Single-hole, 3-hole, or wall-mount installations have different requirements
• Additional Work: May need to replace shutoff valves, supply lines, or repair water damage
• Accessibility: Hard-to-reach installations or tight spaces can require more labor time
• Special Features: Touchless faucets may need electrical connections or battery compartments

What's Typically Included:

• Removal of old faucet and cleanup
• Installation of new faucet with proper sealing
• Connection of supply lines
• Testing for leaks and proper operation
• Cleanup and disposal of old faucet

For an accurate estimate based on your specific faucet and situation, contact us:

• Blue Springs, MO: (816) 377-1400
• Overland Park, KS: (913) 980-0920

Slow kitchen drains are one of the most common plumbing problems. Several factors can cause this frustrating issue:

Primary Causes:

• Grease Buildup: The most common culprit. Grease coats pipe interiors, trapping food particles and soap residue, gradually restricting flow
• Food Particles: Coffee grounds, pasta, rice, and other foods swell and accumulate in pipes
• Soap Scum: Dish soap combines with minerals in hard water to create stubborn deposits
• Garbage Disposal Clogs: Improper disposal use can cause blockages in the disposal or pipes downstream

Other Possible Causes:

• Venting Issues: Improper or blocked vents prevent proper drainage and cause slow, gurgling drains
• P-trap Problems: Debris accumulation in the trap or improperly configured traps
• Main Line Issues: Problems with the main drain line can affect kitchen sink drainage
• Pipe Corrosion: Old pipes with interior corrosion and scale buildup restrict flow

Our Solutions:

• Cable snaking to break up and remove clogs
• Hydro jetting to remove grease buildup and restore full pipe capacity
• P-trap cleaning and adjustment
• Garbage disposal repair or replacement
• Venting repairs if needed
• Camera inspection to diagnose difficult issues

Don't use chemical drain cleaners—they can damage pipes and garbage disposals. Contact us for safe, effective drain cleaning.

Yes! We install, repair, and replace garbage disposals of all types and sizes.

Our Disposal Installation Service Includes:

1. Consultation: We help you select the right disposal size and type for your needs and sink configuration
2. Electrical Verification: We ensure proper electrical supply or coordinate with an electrician if needed
3. Mounting: We properly mount the disposal to your sink drain using the correct mounting system
4. Plumbing Connections: We connect the disposal to your drain system with proper P-traps and drain pipes
5. Dishwasher Connection: If you have a dishwasher, we connect it properly to the disposal
6. Testing: We test the disposal thoroughly to ensure proper operation, drainage, and no leaks
7. Instructions: We explain proper use and maintenance to maximize disposal life

Disposal Sizing Guide:

• 1/3 HP: Basic use, small households, budget-conscious
• 1/2 HP: Most common size, good for average households
• 3/4 HP: Heavy use, larger families, frequent cooking
• 1 HP: Demanding use, large families, commercial-style cooking

We Also Provide:

• Garbage disposal repairs (jams, leaks, electrical issues)
• Replacement of old or failed disposals
• Upgrades to more powerful or quieter models
• Disposal removal if you prefer to eliminate it

Quality disposals with proper installation typically last 10-15 years. We'll help you choose the right one for your needs.

Kitchen remodeling requires careful plumbing planning and execution. Here's what's typically involved:

Planning Phase:

• Layout Review: We review your new kitchen layout to determine plumbing requirements
• Fixture Selection: We confirm compatibility of chosen sinks, faucets, and appliances
• Relocation Planning: If moving the sink or adding islands, we plan new supply and drain routing
• Code Compliance: We ensure all plans meet current plumbing codes
• Permit Applications: We handle necessary plumbing permits

Demolition Phase:

• Disconnecting existing fixtures and appliances
• Capping supply lines and protecting drain openings
• Removing old pipes if being replaced
• Protecting work areas from water damage

Rough-In Phase:

• Supply Lines: Running hot and cold water lines to all fixture locations
• Drain Lines: Installing drain pipes with proper slope and sizing
• Venting: Adding or modifying vent pipes for proper drainage
• Gas Lines: If adding gas appliances, running gas lines (by licensed professionals)
• Appliance Prep: Preparing connections for dishwashers, disposals, ice makers, etc.
• Inspection: Passing rough-in inspection before walls close

Finish Phase:

• Installing sinks and faucets
• Connecting garbage disposals
• Hooking up dishwashers with proper drains and air gaps
• Installing water filtration systems
• Connecting refrigerator water lines
• Installing instant hot water dispensers or pot fillers
• Testing all fixtures and appliances
• Final inspection and approval

We Coordinate With:

• General contractors and project managers
• Cabinet installers for proper timing
• Countertop fabricators for sink cutouts
• Electricians for disposal and appliance power
• Building inspectors for timely approvals

Our goal is to complete plumbing work on schedule without delaying your kitchen remodel project.

Garbage disposal lifespan varies significantly based on quality, usage, and maintenance:

Expected Lifespan by Quality:

• Budget Models (1/3 HP): 5-8 years with moderate use
• Mid-Range Models (1/2 HP): 8-12 years with proper care
• Quality Models (3/4 HP): 10-15 years with regular use
• Premium Models (1 HP): 12-15+ years even with heavy use

Factors That Reduce Lifespan:

• Improper Use: Putting inappropriate items down the disposal (bones, fibrous vegetables, grease)
• Hard Water: Mineral deposits can damage internal components
• Lack of Maintenance: Not cleaning or running disposal regularly
• Insufficient Water: Running disposal without enough water flow
• Overloading: Trying to grind too much at once

Signs You Need Replacement:

• Persistent Odors: That don't go away with cleaning
• Frequent Jams: Regular need to reset or unjam the disposal
• Leaking: Water leaking from the disposal body (not connections)
• Excessive Noise: Grinding, rattling, or abnormal sounds
• Poor Grinding: Food not breaking down effectively
• Won't Turn On: Complete electrical failure with no reset success
• Age: If 10+ years old and having issues, replacement is usually better than repair

Extending Disposal Life:

• Run cold water before, during, and after use
• Grind small amounts at a time
• Clean regularly with ice cubes and citrus peels
• Avoid grease, fibrous vegetables, and non-food items
• Run disposal regularly even if not needed

When it's time for replacement, we'll help you select a disposal that meets your needs and budget, and install it properly for optimal performance and longevity.

Under-sink leaks are common but can cause significant damage to cabinets if not addressed quickly. Here are the main causes:

Common Leak Sources:

• Faucet Supply Lines: Worn washers, loose connections, or deteriorated braided supply lines can leak at the faucet tailpiece or shutoff valve
• P-trap Issues: Loose slip-joint connections, cracked plastic traps, or corroded metal traps
• Garbage Disposal Leaks: Mounting seal failure, cracked disposal body, or loose drain connections
• Dishwasher Connections: Loose dishwasher drain hose connection to disposal or drain
• Sink Drain: Failed putty seal between sink and drain assembly, or loose drain basket
• Shutoff Valves: Corroded or failed shutoff valves at supply connections
• Drain Pipe Leaks: Cracked or corroded drain pipes, especially older metal pipes

Identifying the Leak:

1. Dry everything under the sink thoroughly with towels
2. Place paper towels around potential leak sources
3. Run water and use the disposal
4. Check which paper towels get wet to identify the source

Why Professional Repair Matters:

• Proper Diagnosis: We identify all leak sources, not just the obvious ones
• Correct Repairs: We use proper techniques and materials for lasting repairs
• Code Compliance: All repairs meet plumbing codes
• Damage Assessment: We check for water damage that may need attention
• Prevention: We identify and address other potential problems while we're there

What We Check During Repairs:

• All supply line connections and condition
• Shutoff valve operation and condition
• Drain assembly and P-trap integrity
• Garbage disposal mounting and connections
• Dishwasher drain connections
• Sink mounting and sealing
• Cabinet condition for water damage

Don't ignore under-sink leaks—even small leaks can cause major damage over time including mold, cabinet deterioration, and structural damage. Contact us for fast, reliable leak repair.

Absolutely! We install various types of water filtration systems to improve your kitchen water quality.

Types of Systems We Install:

Under-Sink Filters:

• Single-Stage Filters: Basic filtration for sediment and chlorine taste/odor
• Multi-Stage Filters: Advanced filtration removing more contaminants
• Dedicated Faucet: Separate filtered water faucet at your sink
• Installation: Mounts under sink, connects to cold water supply
• Best For: Improving taste and removing common contaminants

Reverse Osmosis (RO) Systems:

• Most Effective: Removes up to 99% of dissolved solids and contaminants
• Multi-Stage: Typically 3-5 stage systems with sediment, carbon, and RO membranes
• Storage Tank: Includes pressurized storage for filtered water
• Drain Connection: Requires drain connection for waste water
• Best For: Maximum water purity for drinking and cooking

Whole-House Systems:

• Filters all water entering your home
• Installed at main water line
• Benefits all fixtures and appliances
• Protects plumbing from sediment and scale

Our Installation Process:

1. Water Assessment: We discuss your water quality concerns and test results if available
2. System Selection: We recommend the appropriate filtration technology for your needs
3. Space Evaluation: We confirm you have adequate under-sink space
4. Installation: We install the system with proper connections to supply and drain
5. Faucet Installation: We install the dedicated filtered water faucet if needed
6. Testing: We test the system to ensure proper operation
7. Instructions: We explain filter replacement schedules and maintenance

Benefits of Filtered Water:

• Better tasting water for drinking and cooking
• Removal of chlorine, sediment, and contaminants
• Healthier drinking water without buying bottles
• Cost savings compared to bottled water
• Environmental benefits of reducing plastic waste
• Better tasting coffee, tea, and ice

Contact us to discuss your water quality goals and find the right filtration solution for your home.

Yes! We have extensive experience installing farmhouse and apron-front sinks, which require special considerations.

What Makes Farmhouse Sinks Different:

• Exposed Front: The front of the sink is visible and extends past the cabinet face
• Cabinet Requirements: Requires specially sized cabinets or modifications to standard cabinets
• Weight: These sinks are typically much heavier, especially cast iron or fireclay models
• Support Needs: Requires substantial support structures to handle the weight
• Precise Installation: Must be perfectly level and positioned for proper appearance and function

Installation Considerations:

Before Installation:

• Verify cabinet is sized correctly for your specific sink model
• Confirm adequate support structure exists or plan reinforcement
• Determine sink material and weight (cast iron, fireclay, stainless, composite)
• Plan drain placement (centered or offset)
• Consider faucet mounting (deck-mount or wall-mount)

Our Installation Process:

1. Cabinet Assessment: We verify the cabinet is ready for the sink
2. Support Installation: We add support structure as needed for the sink weight
3. Test Fit: We verify fit and alignment before final installation
4. Sealing: We properly seal the sink to prevent water damage to cabinets
5. Leveling: We ensure the sink is perfectly level for proper drainage
6. Plumbing Connections: We connect drains, garbage disposal, and supply lines
7. Final Inspection: We check for leaks and proper operation

Common Farmhouse Sink Configurations:

• Single Bowl: Large single basin for maximum versatility
• Double Bowl: Two equal basins for separate tasks
• Offset Double Bowl: One large and one small basin
• With Drainboard: Integrated draining area

Materials We Install:

• Fireclay: Traditional, durable, classic appearance
• Cast Iron: Extremely durable with enamel finish
• Stainless Steel: Modern, lightweight, easy to maintain
• Composite: Various colors, good durability
• Copper: Unique appearance, antimicrobial properties

Important Tips:

• Coordinate with cabinet installer or general contractor
• Order sink before cabinet modifications to ensure proper fit
• Consider sink depth—deeper sinks may require stooping
• Plan faucet carefully—some configurations work better than others
• Factor in sink weight when choosing materials

Farmhouse sinks are beautiful focal points that require expert installation. We ensure your sink is installed correctly for years of reliable service and stunning appearance.

Yes! Dragonfly Mechanical operates two full-service locations to serve the entire Kansas City metro area.

Blue Springs, MO Location:
1108 SW South Outer Rd, Blue Springs, MO 64015
Phone: (816) 377-1400

Service Area:

• Blue Springs
• Independence
• Lee's Summit
• Grain Valley
• Oak Grove
• Raytown
• Sugar Creek
• All of Eastern Jackson County

Overland Park, KS Location:
6800 W 105th St, Overland Park, KS 66212
Phone: (913) 980-0920

Service Area:

• Overland Park
• Olathe
• Lenexa
• Shawnee
• Leawood
• Prairie Village
• Merriam
• All of Johnson County

Why Two Locations Matter:

• Faster Response Times: We can reach you quickly from the nearest location
• Local Knowledge: We're familiar with homes, building codes, and requirements in both states
• Better Availability: More technicians and service trucks to serve you
• Community Commitment: We're invested in both communities as a locally-owned business

Whether you're in Missouri or Kansas, Dragonfly Mechanical provides the same high-quality kitchen plumbing services with experienced technicians and reliable workmanship.